Skip to content
FOX cam

Factories and logistics

CCTV reports for factories

Production lines, machines, safety gear and shifts. See when lines stopped, who wasn't wearing a helmet, and whether the fire exits stayed clear.

  • Works with existing cameras
  • Analysis on your own PC
  • Trial on your own footage
Workers seated on the floor of a fan workshop balancing fan blades
A fan workshop in Varanasi. Photograph, not a customer site.

What owners ask, and what they get

How long were machines stopped?

The stack light read minute by minute, conveyor stops and the cost of the day.

Are workers wearing safety gear?

Helmet and vest compliance by shift and area, with snapshots to review.

Who was on shift, and when?

Headcount by shift and, if you switch it on with consent, attendance with first in and last out.

One ordinary Tuesday, as FOXcam logs it

Sample
Workers seated on the floor of a fan workshop balancing fan blades, rows of blades beside them
A fan workshop in Varanasi. Photograph, not a customer site.

Factory · Varanasi

  1. Shift start: 23 of 24 staff in

    From the entrance camera, with attendance switched on

    Entrance
  2. No helmet in the press area, 3 times

    Snapshots attached for the supervisor

    Press line
  3. Conveyor stopped for 14 minutes

    Restarted at 12:29

    Line 2
  4. Fire exit blocked by cartons

    Blocked for 41 minutes, cleared at 16:11

    Rear exit
  5. Shift end

    Last out 18:20 · 2 people on overtime

    Entrance
  6. Nobody inside after lock-up

    All cameras quiet till morning

    All

Reports for factories

These are switched on when you choose this business type. Add or remove any of them in Settings.

All reports

  • R1

    Daily Summary

    Was everything all right? Key counts, the top events, camera problems and three highlights, in one page.

    Category: Operations

    Status: Available. Part of the plan and working today.
  • R2

    Event Log

    Every event with its time, camera, type, snapshot and a link to the clip.

    Category: Security

    Status: Available. Part of the plan and working today.
  • R4

    After-Hours Activity

    Any movement while the premises were closed, with clips.

    Category: Security

    Status: Available. Part of the plan and working today.
  • R5

    Video Summary Clip

    24 hours of one camera in a few minutes.

    Category: Operations

    Status: Available. Part of the plan and working today.
  • R6

    Camera Health

    Gaps in recording, blurry, dark, covered or moved cameras.

    Category: Camera health

    Status: Available. Part of the plan and working today.
  • R93

    Alert Response

    Alerts sent, how fast someone answered, and false alarms per camera.

    Category: Security

    Status: Beta. Works, tested so far on sample and hand-made data only.
  • R10

    Safety Gear Compliance

    Helmet, vest and other safety gear compliance by shift and area.

    Category: SafetyAdd-on: Safety gear checks

    Status: Optional add-on. Needs an add-on (and for some, the owner switching it on with consent).
  • R11

    Restricted Area Entries

    Anyone entering an area you have marked as restricted.

    Category: Security

    Status: Available. Part of the plan and working today.
  • R14

    Gate and Guard Presence

    Whether the guard was at the gate overnight, and the gaps when nobody was.

    Category: Security

    Status: Available. Part of the plan and working today.
  • R25

    Perimeter and Line Crossing

    Crossings of fences, walls or boundary lines you draw.

    Category: Security

    Status: Available. Part of the plan and working today.
  • R28

    Left and Removed Objects

    Bags left behind, and things that disappeared from an area.

    Category: Security

    Status: Under review. Flags moments for a person to look at; it can miss things and raise false alarms.
  • R29

    Fire and Smoke

    Possible smoke or flame, with the clip.

    Category: Safety

    Status: Under review. Flags moments for a person to look at; it can miss things and raise false alarms.
  • R30

    Falls, Fights and Running

    Unusual movement such as a fall or people running.

    Category: Safety

    Status: Under review. Flags moments for a person to look at; it can miss things and raise false alarms.
  • R31

    Unusual Activity

    Anything that differs from what is normal for that camera at that hour.

    Category: Security

    Status: Under review. Flags moments for a person to look at; it can miss things and raise false alarms.
  • R33

    Opening and Closing Times

    First person in, shutter up, last person out, shutter down.

    Category: Operations

    Status: Available. Part of the plan and working today.
  • R34

    Night Patrol Check

    Whether the guard was seen at each checkpoint camera on schedule.

    Category: Security

    Status: Available. Part of the plan and working today.
  • R35

    Lights Left On

    Lights or equipment on after closing: wasted power and a fire risk.

    Category: Operations

    Status: Under review. Flags moments for a person to look at; it can miss things and raise false alarms.
  • R50

    Headcount by Shift

    People present in each area against the expected muster.

    Category: Workforce

    Status: Available. Part of the plan and working today.
  • R51

    Workstation Idle Time

    How long each workstation stood unattended.

    Category: Operations

    Status: Available. Part of the plan and working today.
  • R52

    Forklift Near-Miss

    A person too close to a moving vehicle.

    Category: Safety

    Status: Available. Part of the plan and working today.
  • R53

    Loading Count

    Boxes, bags or pallets loaded per truck.

    Category: Vehicles

    Status: Under review. Flags moments for a person to look at; it can miss things and raise false alarms.
  • R72

    Daily Attendance

    First in, last out, hours, breaks, late, early leave and overtime for each employee.

    Category: WorkforceAdd-on: Staff attendance and faces (opt-in, consent)

    Status: Optional add-on. Needs an add-on (and for some, the owner switching it on with consent).
  • R74

    Attendance Exceptions

    Missing punches, matches to confirm, late arrivals and absentees.

    Category: WorkforceAdd-on: Staff attendance and faces (opt-in, consent)

    Status: Optional add-on. Needs an add-on (and for some, the owner switching it on with consent).
  • R80

    Back-door Exits with Bags

    People leaving by a back or side door with a bag, near or after closing.

    Category: Security

    Status: Beta. Works, tested so far on sample and hand-made data only.
  • R83

    Blocked Fire Exits

    Anything left standing in a fire exit for more than two minutes.

    Category: Safety

    Status: Beta. Works, tested so far on sample and hand-made data only.
  • R84

    Evacuation Drill Headcount

    Time to gather at the assembly point and how many people made it.

    Category: Safety

    Status: Beta. Works, tested so far on sample and hand-made data only.
  • R85

    Lone Worker in Danger Areas

    One person alone in a hazardous area for more than five minutes.

    Category: Safety

    Status: Beta. Works, tested so far on sample and hand-made data only.
  • R86

    Smoking in No-smoking Areas

    Smoking seen in areas you mark as no-smoking.

    Category: SafetyAdd-on: Safety gear checks

    Status: Optional add-on. Needs an add-on (and for some, the owner switching it on with consent).
  • R87

    Machine Running and Stopped Time

    Read from the machine's stack light: running, waiting or stopped, minute by minute.

    Category: Operations

    Status: Beta. Works, tested so far on sample and hand-made data only.
  • R88

    Line or Conveyor Stopped

    Minutes the line stood still during working hours, and the cost.

    Category: Operations

    Status: Beta. Works, tested so far on sample and hand-made data only.
  • R89

    Workstation Cycle Time

    Time between operator arrivals at each station, and the slowest station.

    Category: Operations

    Status: Beta. Works, tested so far on sample and hand-made data only.
  • R90

    Shift Start and End

    First and last work at each station against the shift times.

    Category: Operations

    Status: Beta. Works, tested so far on sample and hand-made data only.
  • R91

    Cost of the Day

    An estimate of money lost to empty counters, walk-outs, lights left on and stopped machines.

    Category: Operations

    Status: Beta. Works, tested so far on sample and hand-made data only.
  • R109

    Staff Uniform Check

    Staff seen without the uniform colour, with pictures to check.

    Category: Workforce

    Status: Under review. Flags moments for a person to look at; it can miss things and raise false alarms.

Common questions

Which cameras and recorders work?

Any that record. It pulls footage straight from Hikvision, Dahua and CP Plus recorders over your network, and records the live stream of most IP cameras, including EZVIZ, Uniview, TVT, Imou and Tapo. For anything else, export the footage to a pen drive and drop the files in.

Does my footage go on the internet?

Not for analysis. In the standard setup all analysis runs on your own PC or FOXcam Box, and recordings are not uploaded. Some things do use the internet: reports and alerts, with their photos, go to the WhatsApp numbers and email addresses you choose, and the licence check reaches our server. If you watch from outside the site on your phone or browser, the video passes through our server in India, which is not designed to store it.

How accurate are the counts?

People and vehicle counts are approximate, especially at night or in crowds, and the reports say so. Some checks, such as fire, falls, safety gear and theft review, flag moments for a person to look at. They are aids for review, not proof.

How much does it cost?

It depends on the number of cameras and the reports you need. Contact us and we will send you a quote.

All questions

Request a demoStart a free trial