Skip to content
FOX cam

Setup guide

Set up FOXcam at a site

For installer partners and shop owners. From a fresh Windows PC to the first report, alerts on the phone and the shop on the web: about an hour, in fifteen short parts. Every screenshot is from the current app with a sample shop.

  • Works with existing cameras
  • Analysis on your own PC
  • Trial on your own footage

01Before you start

Have these ready before you go to the site.

A Windows PC
Windows 10 or 11 (64-bit), left on all day, on the same network as the recorder or cameras. A second drive (D:, E:…) is best: FOXcam keeps its data there, not on the Windows drive. Live recording uses about 0.8 GB per camera per day on the small stream.
The installer
FOXcam setup (0.3 MB) downloads the rest (303 MB) while it installs. If the site's internet is slow, bring the full installer (303 MB) on a pen drive instead.
Recorder login
The admin user name and password of the NVR/DVR or cameras. Check it on the recorder's own screen or web page first.
Codes from FOXcam
An activation code (CRLA-…) when the shop has bought a licence, and the link key for the phone app. Installer partners also bring their own installer code (SRIV-4821-style, see part 15).
Internet
Only for activation, sending reports and alerts, the phone app and the web view. Analysis itself works offline.
The owner's consent
Put up a CCTV notice and agree with the owner what is analysed. The owner (or someone they trust) should be there to create their own login.

Careful: Most recorders (CP Plus, Dahua, Hikvision) lock the account for up to 30 minutes after about 5 wrong passwords, and the recorder's own app counts too. Get the password right before you type it into FOXcam. FOXcam itself tries each password only once.

02Install the desktop app

Download FOXcam for WindowsVersion 0.1.0 · controlled beta, not code-signed yet · 0.3 MB setup that downloads the rest (303 MB) · Windows 10 or 11, 64-bit

About this download. This is a beta for the shops in our field test. It is not code-signed yet, so Edge and Windows SmartScreen warn that it is not commonly downloaded or that Windows protected your PC: that warning is expected for an unsigned program. Install it together with our team (we set it up with you), or wait for the signed release. Never install a certificate to get past a warning.

Updating and removing. This beta does not update itself yet: automatic updates start with the signed release. To update, run the newer installer over the old one; settings, reports and recordings are kept. To remove it, use Windows Settings → Apps → FOXcam → Uninstall. That removes the program; the data folder (for example D:\CamReport) stays until you delete it yourself.

Slow or unsteady internet at the site? Use the full installer (303 MB, works without internet; bring it on a pen drive). To check it, run certutil -hashfile CamReport-0.1.0-setup.exe SHA256 and compare with: 505502ca0ee2788288745c6bb0f9826bfc51559dbc97309488add5fb811be45a

  1. Run the downloaded file on the shop PC (double-click it). The small setup shows a progress bar while it downloads the rest; if the internet drops, press Retry and it carries on where it stopped. It checks the download, then opens the installer.
  2. Edge or Windows may warn about the file because this beta is not code-signed yet (see About this download above). Our team goes through this step with you; check the SHA-256 above first if you received the file another way.
  3. Accept the licence agreement page and keep the suggested folder. On a PC with a second drive it is D:\FOXcam (or whichever drive has most space), so the Windows drive does not fill up.
  4. Finish the installer. FOXcam opens by itself and starts its engine; the first start takes up to a minute.
  5. On the first screen, create the owner account: the owner's name, a user name and a password (at least 8 characters, letters and numbers). This one login works on the PC, on the web and in the phone app. Let the owner type the password and write it down somewhere safe.
  6. Read the documents on the next screen, tick I have read these documents and I accept them and click Accept and continue. Every new user sees this once.
FOXcam first start: create the owner account with name, user name and password
First start: create the owner account.
Before you start: licence agreement, terms, privacy policy, data processing terms and acceptable use, with the accept box
Then accept the documents. AI results can be wrong: alerts and counts are for a person to check.

FOXcam puts its data (database, recordings, snapshots, reports) on the largest drive that is not the Windows drive, for example D:\CamReport. Only on a PC with a single drive does it stay on C:. To see or change it later: Settings → AI, privacy & data → Where the data is kept.

Settings card Where the data is kept, listing the drives with free space and a folder box
Where the data is kept: the Windows drive is greyed out when another drive exists.

Tip: Closing the window only hides FOXcam in the tray (bottom-right of the taskbar), and it keeps working. It also starts by itself when Windows starts. To stop it, right-click the tray icon and choose Quit.

03Trial, licence and installer code

Every new PC starts with a free trial with every feature. The days left are shown in Settings → Licence & support, and a banner appears on every page when the end is near.

  1. Open Settings → Licence & support.
  2. If the shop has bought a licence, type the Activation code (CRLA-…). It needs the internet once.
  3. Installer partners: type your Installer code in the box beside it. The shop then appears on your My shops page by itself (part 15). Do this even during the trial; you can activate later.
  4. Click Activate.
Licence card: free trial with days left, this PC's id, activation code and installer code boxes, Activate button
Licence: activation code, and the installer code that links the shop to the partner.

Note: No internet at the shop? Send This PC's id to FOXcam and use Use a licence file with the file you get back. When a licence ends, reports, events and exports made so far stay available; only new analysis stops.

04Add the cameras

FOXcam finds cameras and recorders on the network. If the site has an NVR/DVR, add the recorder: one login brings all its cameras, and FOXcam can download recorded footage from it. Add single cameras only when there is no recorder.

  1. Open Cameras and click Find cameras, NVRs and DVRs. After a minute it lists what it found: the IP address, the brand and why it thinks so. (Know the address already? Use Add by IP address. Have an RTSP link from the manual? Use Add by stream address.)
  2. Click Set up next to the recorder (or a camera).
  3. Check the Brand / type. If the brand is not listed, try XMeye-based or TVT-based DVR/NVR (many Indian brands), or Any ONVIF device. Not sure: Not sure – try automatically.
  4. Enter the user name (usually admin) and the password. Leave Video port (RTSP) at 554 and Web port at 80 unless the installer changed them; the web port is used to download recordings and receive alarms.
  5. Set Channels to look for: 1–4 for a camera, or the recorder's size (8, 16, 32…) for an NVR/DVR.
  6. Click Test connection. FOXcam logs in once and shows every channel with a picture from it.
  7. Give each camera a clear name ("Main gate", "Billing counter"). Tick Read number plates or Check safety gear only on cameras that need it. Name the device and click Save cameras.
List of devices found on the network: four CP Plus cameras and one CP Plus NVR, each with a Set up button
Find cameras: everything on the network, with a Set up button for each.
Connect a camera or recorder: brand CP Plus, IP address, user name, password, video port, web port and channels
Set up: brand, address, login, ports and how many channels to look for.

Note: Wi-Fi cameras (EZVIZ, Imou, Tapo) are recorded only when something moves, so they do not slow the shop's Wi-Fi. EZVIZ and Tapo need local streaming switched on in their own app first. Some consumer cameras (Qubo, Mi, realme…) work only through their own cloud; for those, copy footage from the memory card and use Import footage (part 7).

05Draw lines and zones

Lines and zones tell FOXcam what matters on each camera. In Cameras, click Lines & zones under a camera and draw on its picture.

  1. + Counting line, then click the start and the end of a line across the entrance door or gate. People and vehicles crossing it are counted in and out. The white arrow shows the "in" side; Flip in/out reverses it. Other line types: Perimeter (alert on any crossing), Back or side door, Pavement outside (people walking past, for the walk-in rate).
  2. + Zone, click the corners of an area, then Finish zone. Name it and choose its Kind: restricted area, billing counter, queue, shelf aisle, fire exit, parking and more. The hint under the kind says what it does.
  3. Click Save lines & zones. Footage analysed from now on uses them.

Tip: Draw the counting line where people walk straight across it, not where they stand and wait. A restricted zone alerts every time someone enters it, so keep it to places where nobody should be.

06Shop details

  1. Open Settings → Site & business.
  2. Type the Site name as the owner wants it on reports and WhatsApp messages.
  3. Set when the site Opens and Closes (the same time for both = open 24 hours). After-hours alerts and the opening/closing times in reports depend on this.
  4. Choose the Report language: English, Tamil or Hindi.
  5. Under Type of business, click the card that fits (shop, supermarket, factory, school, hospital, apartment…). It picks the reports that suit the site.
  6. Click Save settings (bottom right).
Settings Site card: site name, opening and closing times, report language
Site name, hours and report language.
Type of business cards grouped as shops and markets, food and stay, factories and logistics
Type of business: one card per kind of site.

07Start analysing

Now tell FOXcam to analyse footage from now on. In Settings → Watching & alerts, card Reports and live watching:

SettingChoose
How often to make reportsEvery hour while you test, so results come quickly. Later: Daily at, say, 21:00.
Footage from the saved camerasAutomatic: downloads from recorders that keep footage (Hikvision, Dahua, CP Plus) and records the live stream of the others.
Record whenAll day, or opening hours / after hours only.
Video qualityAutomatic: FOXcam tests what this PC can carry and gives full quality first to cameras that read plates or faces. Wi-Fi cameras stay on the small stream.
Fetch footage from the recorderEvery hour (the default): recordings are downloaded and analysed through the day, so reports come out on time.
Downloaded footageLeave Delete once analysed and in a report ticked. Reports, events, search and Ask keep working; for playback of old footage use the recorder.
Instant alertsTick it for alerts within seconds: someone after closing, a restricted area, a covered camera, fire, a fall.
  1. Choose the settings above and click Save settings.
  2. Click Make the scheduled reports now to start straight away instead of waiting for the next hour.
  3. Watch the status box above that button: it shows each recorder, whether it is downloading or recording, and any error.
  4. Optional: under Video quality for each camera, set one camera to Full quality by hand (for example the gate camera that reads number plates).
Settings card Reports and live watching: report frequency, footage mode, video quality, keep days, download limit, fetch interval and delete after report
Reports and live watching.

Note: Jobs stays empty at first. From a recorder, the first fetch takes the last hours, which can take a while on a big NVR. From live cameras, the first piece appears after about 10 minutes of recording.

Footage on a pen drive instead

For a recorder that cannot be reached, or to analyse an old incident: Import footage, type the folder or file (or several, one per line), and click Start analysis. Leave Camera and Recording started at empty when the file names carry them (for example ch01_20261111_101500.avi). For Hikvision, Dahua and CP Plus recorders on the network, the card From a recorder on the network on the same page downloads chosen cameras and up to 7 days.

Import footage page with a folder path, optional camera and start time, and the Start analysis button
Import footage: from a USB drive, a folder or a DVR export. Nothing is uploaded.

08Check that it works

  1. Jobs: what is being downloaded and analysed now (with Pause and Cancel), then camera → day → hour → files. Progress is saved every few seconds; after a power cut, jobs show as paused and continue with Resume.
  2. Today: people and vehicles counted, the busiest hour, after-hours events, camera health, and Ask for questions in your own words.
  3. Reports: pick the date, then open the PDF, Excel or CSV. Each build is kept as its own set, so an hourly report never replaces the one before. Build reports makes them now; the WhatsApp message that goes with them is shown on the right.
  4. Camera health: a score per camera for today, the kind of problem (device, connection, recording) and 30 days of history.
  5. Live and Playback: the cameras live, and the day's recordings on a timeline with the AI events marked.
Jobs page: one file running with Pause and Cancel, others waiting, and the camera summary below
Jobs: working now, then all cameras by day.
Today page with people entered, vehicles, after-hours events, cameras OK, Ask box, what was unusual and entries by hour
Today: the day so far.
Reports page: a day with 33 files, PDF, Excel and CSV buttons per report, and the WhatsApp message
Reports: date → files, with the WhatsApp message beside them.
First page of the Daily Summary PDF: action needed, people entered, vehicles, after-hours events, cameras OK and entries by hour
The Daily Summary PDF the owner receives.
Camera health page: Entrance, Good, score 100, no problems today
Camera health: worst cameras first.

09Alerts, watch rules and incidents

Alerts

Every alert (from the live picture or from analysed footage) lands on Alerts with its picture and a short clip. Press I'm on it so it is not passed on to the next person, then close it as Resolved, False alarm or Could not tell. The switch at the top right: Follow the hours (normal), Armed (alert on anyone, e.g. a holiday) or Disarmed (staff working late; fire, falls and camera faults still alert).

Tip: Who gets an alert first (the guard), and who next if nobody answers (manager, then owner), is set in Settings → Watching & alerts → Who gets alerts. Sirens and lights on the network (Shelly, Tasmota) are on the same tab.

Watch rules in plain words

  1. Open Watch rules and write what you want to be told, for example "Tell me if anyone is on the Entrance camera after 10 pm" (or press the microphone and say it).
  2. Click Read it. FOXcam writes the rule back: what, which camera or zone, and when. Check it, change the camera or zone if needed.
  3. Click Yes, start watching.
Watch rules: the rule typed in, and Is this what you mean? Alert when a person is seen at Entrance, 22:00–09:00, with camera and zone choices
Watch rules: always check the rule it read back before saying yes.

Note: Rules count people, vehicles and animals on a camera or in a zone, by time of day. They cannot tell who someone is or judge behaviour ("suspicious", "stealing"), and say so instead of guessing.

Incidents

When something happens, click Make an incident on the alert, or Incidents → New incident: what happened, from–to, cameras, and an FIR or claim number if there is one. The incident holds that footage so it is not deleted automatically, and the owner can make an evidence pack from it. A hold protects what is on this PC; it cannot stop the recorder overwriting its own disk, so make it quickly.

10Link the PC to the cloud

The web view and the phone app reach the shop PC through the FOXcam cloud. Each PC is linked once.

  1. On the shop PC, open Settings → Sending & apps, card Cloud link (phone app and branches).
  2. With an activated licence: click Link this PC to the cloud. That is all.
  3. During the trial: enter the FOXcam server address https://cloud.foxcam.in and paste the Link key you got from FOXcam support or your installer partner. Click Save beside the key, then Save settings. The key is kept encrypted on the PC.
  4. Look at the Phone app card on the same tab. Within a minute it says "This PC is reachable from the phone app" and shows the Shop ID, the web address and a QR code.
Cloud link card: Link this PC to the cloud button, server address and link key boxes
Cloud link: one click with a licence, or the server address and link key during the trial.
Phone app card: This PC is reachable from the phone app, Shop ID, the web address and the pairing QR code
Phone app: the Shop ID, the web address and the QR code for phones.

Careful: Treat the link key like a password: paste it only into FOXcam, never into WhatsApp groups or e-mail. Making a new key stops the old one.

11Users, web and phone

Everyone at the shop uses a user of the shop PC, the same login on the PC, the web and the phone. These users stay on the PC; the cloud only passes the login through. So the PC must be on for the web and phone to work.

Add people

  1. On the shop PC open Users and click + Add user.
  2. Enter the full name and a username, and choose the Role.
  3. Click Create user and give them the temporary password shown. They choose their own at the first login. A guard can then be limited to some cameras with Cameras on their row.
Add user dialog: full name, username, role choices and the temporary password
Users: one login per person, with a role.
RoleCan
OwnerEverything, including settings, users, faces and evidence exports.
ManagerToday, alerts, live, playback, events, incidents, reports and attendance, with HR corrections.
GuardAlerts, live and playback (optionally only some cameras), events and reports.
InstallerCameras and settings, for the person who sets up and services the site. No footage reports.
AuditorReads reports, events, attendance and the audit log. No live view.

Tip: Two-step login (an authenticator app code) can be switched on by each person under My account. Recommended for the owner.

The shop on the web

  1. Open https://cloud.foxcam.in/shop/<Shop ID>/. The exact link is shown in Settings → Phone app.
  2. Log in with the shop PC's user name and password.
Login page of the shop web view showing the shop name Sample Stores
The shop on the web: log in with the PC's user.

Careful: The address https://cloud.foxcam.in on its own is the staff and partner portal. A shop user's password does not work there, and that is why it says "Wrong username or password". Always use the /shop/<Shop ID>/ link.

On the web you get Today, Alerts, Live, Playback, Events, Watch rules, Incidents, Camera health, Reports, Attendance and My account. Cameras, Settings, Users and Import are only on the PC, so nobody can change the setup from the internet.

The phone app

  1. Install the FOXcam app on the phone (Android test builds come from FOXcam support).
  2. Open it, choose to add a shop, and scan the QR code in Settings → Phone app on the PC (or type the Shop ID).
  3. Log in with the shop PC's user name and password, and allow notifications.
  4. Test it on mobile data (Wi-Fi off): open Live. If the video plays, the cloud link works from outside the shop.

12Optional extras

None of these are needed for the first report. Switch them on once the basics work.

WhatWhereNotes
Reports by WhatsApp and e-mailSettings → Sending & apps → Report deliveryChoose FOXcam (recommended) and add the owner's numbers; no WhatsApp Business account of their own is needed. Then Send a test message.
Weekly camera health messageSettings → Sending & apps → Weekly camera health and monthly digestAdd the installer's name, WhatsApp number and installer code, so the installer hears about covered or offline cameras too.
Smart search, Ask, Voice questionsSettings → AI, privacy & dataOne-time downloads (Smart search about 950 MB, Ask about 1.1 GB, Voice about 250 MB). Each row has Download, Stop and Remove; everything runs on this PC.
Vehicle types (autos, two-wheelers, buses…)Settings → AI, privacy & data → AI detectorIndian vehicles (any PC) is the default. Leave it.
BackupsSettings → Licence & support → BackupsSet a backup password (write it down), a folder on another drive or USB disk, and Back up every day by itself.
Staff attendance and facesStaff & faces, Settings → What to detectOff by default. Needs the staff's written consent; only the owner can switch face recognition on.
Billing softwareImport footage → Billing data, or Settings → Reports → Billing software linkTally, Marg, Gofrugal, Vyapar, Petpooja exports. Shows how many visitors bought something.
Backups card: backup password, folder, time, keep the last, back up every day by itself, back up now
Backups: an encrypted copy of the database, settings and reports (not the recordings).

13Before you leave the site

  • Windows Sleep is set to Never (Settings → System → Power). A sleeping PC analyses nothing.
  • FOXcam starts with Windows: restart the PC once and check that the tray icon comes back.
  • Settings → Licence & support shows the licence (or trial) and your installer code is saved.
  • At least one report has been made and opened in Reports.
  • Live shows every camera; Camera health shows every camera as good.
  • The owner can log in on the web and on their phone, and a test alert reached the phone.
  • The owner has their password written down and knows that closing the window is fine but Quit stops everything.
  • A daily backup is set (Settings → Licence & support), with the backup password kept by the owner.

14If something goes wrong

Test connection says the password is wrong, but it works on the recorder's web page
Check the brand, then try Any ONVIF device. If ONVIF is off on the recorder, switch it on (CP Plus: Setup → Network → Access platform / ONVIF). Do not keep retrying: the recorder locks after a few wrong tries.
"Logged in, but no video stream answered"
Turn on RTSP / ONVIF in the recorder's network settings, then test again.
The recorder account is locked
Wait 30 minutes without trying again, in FOXcam or the recorder's app, then use the right password. FOXcam does not retry a refused password by itself; it tries again when you save the new one.
Jobs shows nothing
Click Make the scheduled reports now, and look at the status box above it for "downloading" or an error. If no recorder is listed there, Footage from the saved cameras is still Off, or the cameras were not saved. A recording still being written is fetched once the recorder has closed it.
The shop's Wi-Fi became slow
Wi-Fi cameras stream all the time while someone watches Live. Keep Record on Automatic (Wi-Fi cameras only on movement), use SD rather than HD on Wi-Fi cameras, or connect them with a cable.
"Wrong username or password" on the website
You are on the staff portal. Use https://cloud.foxcam.in/shop/<Shop ID>/ with the shop PC's login (part 11).
The Phone app card says "Connecting to the cloud…" with an error
Check the PC's internet, the server address, and that the key was pasted completely. Ask support for a new key if it still fails.
Live says "not available"
Check that the camera is on and the PC can reach it. On Wi-Fi cameras open SD rather than HD. On the phone, live view pauses after 5 minutes without a touch: tap to resume.
Someone forgot their password
The owner opens Users and clicks Reset password on that person's row. If the owner forgot theirs, call FOXcam support: it is reset on the PC itself.
The licence has ended
New analysis stops; everything made so far stays viewable. Settings → Licence & support → Buy a licence or Renew online, or ask your installer.
Anything else
Settings → Licence & support → Help and support: describe what went wrong and click Send to support (or Save diagnostics file). Passwords, phone numbers, footage and faces are left out.

15For iFarmer staff and partners

The portal at https://cloud.foxcam.in is for iFarmer staff and installer partners only. Shop users never log in here.

Make a link key for a shop (staff)

  1. Log in to the portal with your staff account and open Branches.
  2. 1. The shop: choose it in the list, or click + New shop (shop name, type of place, contact person, WhatsApp number) and Add shop. Two shops may have the same name; the Shop ID in brackets is what makes each one unique.
  3. 2. Its key: click Make a key for <shop>. Under 3 the portal address and the key appear with Copy buttons. The key is shown only once.
  4. Give it to the person setting up the shop PC (part 10) in person or by phone, not in a group chat. Within a minute of saving it on the PC, the shop shows PC online on this page.
Portal Branches: the shop chosen, Make a key button, and step 3 with the portal address and branch key with Copy buttons
Portal → Branches: one key per shop PC. (Sample key from a test portal.)

Staff accounts (staff)

Portal Users (+ Add user) are iFarmer's own accounts, separate from every shop's users. Give support and installation staff the Manager role (footage requests and branch keys), and keep Owner (licences, payments, partners, users) for the company owner. An installer company's login is a user with the role Installer; add it to the partner under Installer partners → Open → Portal logins, and it then sees only that partner's shops.

Portal Users: an installer login and the staff owner, with role, last login and status
Portal → Users: staff and installer logins only.

Installer partners: your code and My shops

  1. FOXcam gives your company a portal login and an installer code like SRIV-4821.
  2. On every shop PC you install, type the code in Settings → Licence & support beside the activation code (part 3), or under Settings → Sending & apps → Weekly camera health.
  3. Log in to the portal: My shops lists your shops, whether each PC is reporting, cameras that need a visit in the last 7 days, and licences due for renewal. The shop appears by itself after its next check-in; nobody has to add it by hand.
  4. Fix a camera problem before the owner notices: every Monday you also get a WhatsApp message with the shops that need you.
Installer portal My shops: your installer code, All fine, and the shop list with PC reporting and cameras OK
My shops: the installer's own page.

Note: A shop is linked to the first installer whose code it sends, within 30 days of activation. Another installer's code never moves it. A shop that bought directly from FOXcam refuses installer codes. Ask FOXcam support if a shop is linked to the wrong company.

Stuck? Write to info@ifarmertechnologies.com with a screenshot. Never send passwords or keys.

Need a hand?

Check your setup with our team

Have your recorder make and model, camera count and Windows PC details ready. We can help you work through compatibility and installation questions.

Request a demoStart a free trial